If your Arlo camera is offline +1-888-255-8018, follow these step-by-step instructions to troubleshoot and fix the issue:

Step 1: Check the Arlo App +1-888-255-8018

  • Open the Arlo app to verify the camera's status.
  • Confirm if it is truly offline or if the app needs refreshing.
  • Log out and log back in, or force close and reopen the app.

Step 2: Check Camera Power +1-888-255-8018

  • Battery-powered cameras: Ensure the batteries are charged or replace them with fresh ones.
  • Wired cameras: Check the power connection and make sure the cable and outlet are functional.

Step 3: Verify Internet Connection +1-888-255-8018

  • Ensure your Wi-Fi network is functioning properly.
  • Restart your router and modem.
  • Make sure the Arlo base station or SmartHub (if applicable) is connected to the router.

Step 4: Check the Base Station/SmartHub +1-888-255-8018

  1. Ensure it is online:
    • Verify the LED indicators:
      • Power LED: Solid green.
      • Internet LED: Solid green.
      • Camera LED: Solid or blinking green (depending on usage).
  2. Restart the base station:
    • Unplug the base station for 10 seconds and plug it back in.
    • Wait for it to boot up (can take up to 2 minutes).

Step 5: Reposition the Camera +1-888-255-8018

  • Ensure the camera is within range of the Wi-Fi router or base station.
  • If the camera is too far, move it closer to improve signal strength.

Step 6: Sync the Camera Again +1-888-255-8018

  1. Press the Sync button on the base station/SmartHub.
  2. Press the Sync button on the camera (refer to your model’s manual for exact button locations).
  3. Wait for the LED to blink and stabilize, indicating successful pairing.

Step 7: Update Firmware +1-888-255-8018

  • Open the Arlo app and go to Settings > My Devices > [Your Camera].
  • Check for firmware updates and install them if available.

Step 8: Factory Reset (If Necessary) +1-888-255-8018

  1. Remove the camera from your Arlo account via the app (Settings > My Devices > Remove Device).
  2. Reset the camera:
    • Locate the reset button (may be on the back or bottom of the device).
    • Press and hold it for about 10-15 seconds until the LED flashes.
  3. Add the camera back to the app.

Step 9: Contact Arlo Support +1-888-255-8018

  • If none of the steps work, reach out to Arlo support for further assistance. They may be able to identify specific issues with your camera or account.

Would you like assistance with any of these steps or additional information?